Banding 182 Mahogany/Holly, Black edges - 1/8" wide and extra thick for bending.

1/8" wide and extra thick at about 1/8". Made from solid Mahogany and holly with black edges.
Polyurethane glue used as the adhesive for the black edge laminate. Yellow wood glue will not hold up under high heat, but the polyurethane glue will.
Made extra thick (about 1/8") to facilitate bending, as standard thickness (.050") will buckle when bending.
I have posted a video on how to heat bend this banding (see below).






A similar banding shown bent. This banding will bend, under heat, in the same manner.

YouTube Video on How to Bend Inlay Banding on a Hot Pipe.

Go Back